Filter Cage welding machine,  Wire cage welding machine,  Auto CNC filter cage welder  Cage welding line  Multi-spot welder    Filter Cage welding machine,    Model                  Wire qty                       Ring space        Cage diameter(mm)       Control unit DLN-16-5        8,10,12,14,16                   No restriction           100-160                   KD-DL08D   DLN-24-5   8,10,12,14,16,18,20,22,24    No restriction           100-200                   KD-DL08D     General Specification  Input voltage: 380V (2 phase) •  Power frequency: 50/60Hz •  Cooling method: natural cooling •  Air pressure: 0.6-0.8 MPa •  Insulation grade: F •  Power capacity: 80 KVA •  Working load: 20 KVA   Features   1. Rails (7500mm) and material shelf (7500mm) equipped and connected to the welding unit.      The front end of the rail is adjustment-free. Good linearity can be      achieved for wire cages. 2. Equipped with auto feeding unit, no restrictions on ring space. 3. Positioning mould manufactured with wire-cutting process, it features high accuracy, good     insulation and long life. 4. Four air tanks, short air route inside the machine ensures quick response of the cylinder. 5. 25mm front plate resulted from one-time machining, firmly secure that the welding cylinders     are on the same plane and perpendicular to the axes, thus the linearity of the cage can be     ensured. 6. Air valves (Airtac) together with stroke-adjustable cylinders increase welding speed,     pre-pressing only takes 0.08s. 7. Controlled by micro-computing unit. 8. Time-sharing power-on transformer reduces the burden on local electricity grid.